D-Link DSL-2750U User Manual page 91

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Figure 69. The page for creating a new connection. The USB modem section.
Parameter
Mode
APN
Figure 70. The page for creating a new connection. The IP section.
Parameter
Obtain DNS server
addresses
automatically
Primary DNS server/
Secondary DNS server
Vendor ID
Hostname
8 Some LTE USB modems do not support network type selection and work in the auto mode regardless of the value
selected from the drop-down list.
USB modem
The value of the field specifies the type of the network to which the
router connects. Leave the auto value to let the router connect
automatically to an available type of network, or select a needed
value from the drop-down list.
An access point name.
IP
Select the checkbox to configure automatic assignment of DNS
server addresses. If the checkbox is selected, the Primary DNS
server and Secondary DNS server fields are not displayed.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
The identifier of your ISP. Optional.
A name of the router specified by your ISP. Optional.
Page 91 of 181
Configuring via Web-based Interface
Description
8
Description