D-Link DSL-2750U User Manual page 125

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Parameter
Gateway
Metric
Via Interface
After specifying the needed parameters, click the Apply button.
To edit an existing route, select a needed field in the relevant line of the table, change its value, and
click the Apply button.
To remove an existing route, select the checkbox located to the left of the relevant line in the table
and click the Delete button. Then click the Apply button.
An IPv6 address through which the destination network can be
accessed. The field is available when the <Auto> value is selected
from the Via Interface drop-down list of this line.
A metric for the route. The lower the value, the higher is the route
priority. Optional.
Select an interface through which the destination network can be
accessed from the drop-down list. If you have selected the <Auto>
value of this drop-down list, the router itself sets the interface on the
basis of data on connected networks.
Page 125 of 181
Configuring via Web-based Interface
Description