Print Server - D-Link DSL-2750U User Manual
Wireless adsl2+ router with 3g/lte/ethernet wan support and usb port
Hide thumbs
Also See for DSL-2750U:
- User manual (210 pages) ,
- Quick installation manual (42 pages) ,
- Technical support setup procedure (19 pages)
Table of Contents
Advertisement
DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Print Server
On the USB storage / Print-server page, you can configure the router as a print server. Being
configured in this way, the router will allow your LAN users to share the printer connected to the
USB port of the router.
To connect a printer to the router, power off both devices. Connect printer to the USB port of the
router, power on the printer, then power on the router.
To configure the router as a print server, select the Enable/Disable print-server checkbox and
click the Apply button.
If you don't want to use the router as a print server, deselect the Enable/Disable print-server
checkbox and click the Apply button.
Figure 113. The USB storage / Print-server page.
Page 147 of 181
Configuring via Web-based Interface
Advertisement
Table of Contents
