D-Link DSL-2750U User Manual page 82

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
The Miscellaneous section is displayed for all connection types except for Bridge.
Figure 60. The page for creating a new connection. The Miscellaneous section.
Parameter
Enable RIP
Enable IGMP Multicast
NAT
Firewall
Ping
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Displayed for the PPPoE, PPPoE Dual Stack, Static IP, and
Dynamic IP types only.
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
Displayed for the PPPoE, PPPoE Dual Stack, Static IP, and
Dynamic IP types only.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Select the checkbox to allow the router to answer ping requests from
the external network through this connection. For security reasons,
it is recommended not to select this checkbox.
Page 82 of 181
Configuring via Web-based Interface
Description