Control and engineering
6.2 Control via remote PLC
6.2.5
User acknowledgment
The user can acknowledge active faults after the fault cause has been rectified. When a fault is
acknowledged by the user, the message system is reinitialized and any messages that are no
longer active are hidden.
Two acknowledgement types are available:
• "Acknowledgement"
- and -
• "EtechAcknowledgement" (only available for users with the appropriate authorization)
See chapter Diagnostic system (Page 99).
78
SIMOCRANE Energy Storage System Management V01.01
Operating Instructions, 04/2023, A5E51573536B AE