1MRS759142 F
ARC1001
COM1001
Figure 14: Ethernet modes with Network 1 and Network 2
1
2
3.2.6.2
Protocol control
It is possible to allow or block different protocols for different network interfaces
in the protection relay using the parameters in Configuration > Communication >
Protocols > Network1, Configuration > Communication > Protocols > Network2
and Configuration > Communication > Protocols > HMI Port.
All protocols are allowed for each network by default, and can be separately
disabled.
REX640
Technical Manual
1
2
Network 1
Network 1 / Network 2
1
2
COM1002
Basic functions
1
2
COM1003
87