Stopping The Engine; Moving The Snowblower - Yamaha YT624 Owner's Manual

OPERATION

STOPPING THE ENGINE

1. Turn the engine switch key to the "STOP
5" position.
STOP
1
1. "STOP 5"
2. Engine switch key
2. Turn the fuel cock lever to the "OFF" po-
sition.
1. "ON"
2. "OFF"
3. Fuel cock lever
ON
START
2

MOVING THE SNOWBLOWER

1. Use the auger housing height control
lever to raise the auger to the highest
position.
1
1. Auger housing height control lever
2. Auger housing
2. Make sure that the shift lever is in the
"N" (Neutral) position, and move the
throttle/choke lever to the "FAST :" po-
sition.
1
2
1. Shift lever
2. "N" (Neutral)
– 32 –
2