Audio - Bosch LHN-UC15L-SIP User Manual

28 en | Web-GUI configuration
4.5

Audio

Use the Audio page to adjust and configure audio preferences. Different tabs are shown
depending on the type of device connected (IP Horn loudspeaker or IP Amplifier module).
There are basic audio settings and advanced audio settings.
By default, the device comes with the Advanced view disabled. Only the basic audio settings
are displayed unless you enable the Advance view.
Basic audio settings:
–
–
–
Advanced audio settings:
–
–
–
–
Line In
Mic In
Signal Generator
Audio File Manager
Network Audio In
(SIP)
Figure 4.2: DSP signal flow diagram for IP Horn loudspeaker
Line In
Signal Generator
Audio File Manager
Network Audio In
(SIP)
Figure 4.3: DSP signal flow diagram for IP Amplifier module
To display the advanced audio settings, enable the Advanced view on Maintenance, page 37 .
2023.02 | V01 | F.01U.389.835
Audio
User Equalizer
Microphone Equalizer
Noise gate
Speaker equalization
ANC (Ambient Noise Control for automatic volume adaption)
Sine generator
Line
Out
Level
Noise User
Audio
Gate Level
Router
Mic
Mic
Talkb.
Level
Line
Out
Level
Audio
Router
Noise
Gate
User User
EQ Delay
EC
User User
Level EQ Delay
User manual
LHN‑UC15L‑SIP | LHN‑UC15W‑SIP | AMN‑P15‑SIP
Spkr.
ANC
EQ
User Spkr.
EQ
Bosch Security Systems B.V.
Line Out
Network Audio out
(SIP)
Line Out
Amp Out