Bosch AUTODOME IP starlight 5000i IR User Manual page 65

AUTODOME IP starlight 5000i IR
–
OR
–
4
–
OR
–
4
If you cannot control the unit after the firmware upgrade, then cycle the power to the unit. If a
power reset does not solve the problem, or if Configuration or video management software
identifies the unit as "Videojet Generic," then contact your Bosch Service Center for an RMA
for the unit.
Bosch Security Systems
You cannot connect to the unit in the Web browser.
Configuration Manager or BVMS or similar software identifies the unit as "Videojet
Generic".
Reboot the unit using one of the following methods:
In the web browser, type the IP address and then /reset (without any punctuation). Press
the Enter key.
In Configuration Manager, right-click the IP address and click Restart.
Wait two minutes for the process to complete.
User Manual
Troubleshooting | en 65
2023-01 | 1.3 |