Aux Control; Digital I/O - Bosch AUTODOME IP starlight 5000i IR User Manual

AUTODOME IP starlight 5000i IR
Select the appropriate pre-position (1 through 6). Click
Note: If the pre-position is already stored, a dialog box displays the message, "Overwrite
current pre-position?" Click OK to overwrite, or click Cancel to cancel the operation.
Click
10.1.4

AUX Control

With the tab AUX Control you can enter pre-programmed keyboard control commands. These
commands are composed of a command number plus the appropriate function key (Show pre-
position, Set pre-position, AUX on, or AUX off). A valid combination either issues a command
to the device or displays an on-screen menu.
(Refer to the "Operating the camera with AUX commands" section of the manual for a list of
all AUX commands for your camera.)
Show pre-position
Click this button to display a pre-position.
Set pre-position
Click this button to set a pre-position.
AUX on
Click this button to activate an AUX command.
AUX off
Click this button to deactivate an AUX command.
10.1.5

Digital I/O

(only for cameras with alarm connections)
Depending on the configuration of the unit, the alarm input and the output are displayed next
to the image. Expand the Digital I/O group if necessary.
The alarm symbol is for information and indicates the status of an alarm input:
–
The alarm output allows the operation of an external device (for example, a light or a door
opener).
–
Input 1
This parameter identifies the first alarm input.
Input 2
This parameter identifies the second alarm input.
Output 1
Click the checkmark icon to enable the output. The checkmark becomes green.
Note: You can change the name of an alarm input in Configuration > Interfaces > Alarm
Inputs > Input 1 (or Input 2) > Name.
You can change the name of an alarm output in Configuration > Interfaces > Alarm Outputs >
Output name.
Bosch Security Systems
to display the selected pre-position in the video image.
The symbol lights when the input alarm is active.
To activate the output, click the checkmark symbol.
– The symbol lights when the output is activated.
User Manual
Operation via the browser | en
to store the pre-position.
2023-01 | 1.3 |
55