Table of Contents
Advertisement
5
6
7
Smart-hopping 2.0 Access Point 1.4 GHz Installation Guide
To secure the nuts, place a push nut
over each of the bolts and push down
until it sits on top of each nut.
You can do this by hand or use a tool,
such as pliers or an open-ended
wrench
Connect the Ethernet (network
connection) cable to the LAN port on
the Access Point. This provides power
to the Access Point and lights up the
LEDs on the front of the Access Point (if
other end of Ethernet cable is
connected to a powered
Synchronization Unit).
With the LAN cable now connected,
attach the Access Point to the
Mounting Bracket and make sure that
the rectangular cutout in the
Mounting Bracket aligns with the
shape of the Access Point.
Insert the four small shoulder screws
on the Bracket into the keyholes on
the AP and slide the AP toward the
LEDs. You hear a click noise when the
Access Point is secured to the Bracket.
DRAFT - 03 JUN 2022 13:32
Below Ceiling Mount
Push Nut
2-27
Advertisement
Table of Contents
