Specifications - Toshiba TOSVERT VF Series Instruction Manual

Operating procedure
Key LED indication
→
"copy"
SFT
→
"prot"
→
"f- "
→
"f- "
ENT
→
SFT
"f-01"
"f-02"
ENT
→
( "f-01"
→
" 0"
"1"
SFT
→
"0" "0" (flashing)
ENT
→
"f-02"
- If the [ESC] key is pressed, Remote Keypad returns to previous status (except when executing).
- The memory protection function (write protection) cannot protect Remote Keypad parameter.
- The memory initialization function initializes Remote Keypad parameter when " sys (selecting all memories)" is
selected.

5. Specifications

Item
Part number
Applicable model
Communication
Service environment
Ambient temperature -10 to +50°C
Storage temperature -25 to +65°C
Relative humidity
Vibration
Cooling method
"comp"
< Selecting a desired function >
→
Select " f- " (Remote Keypad parameter editing function) with the [SFT] key.
"clr"
< Entering the selected function >
After selecting " f- " with the [SFT] key, press the [ENT] key and " f-01 "
"f-01"
appears in the display window.
< Selecting a parameter title to edit or display >
Each time the [SFT] key is pressed, the display changes
"f-02" " f-01 "
" f-02 "
alternately.
< Entering a parameter title to edit or display >
If " f-02 " is selected with the [SFT] key and the [ENT] key is pressed, the
→
current value (" 1 ": Executing comparison after copying by way of example)
" 1"
appears in the display window. If " f-01 " is selected as parameter to display,
"v100" )
the indication of Remote Keypad software version appears as shown in
parentheses.
< Changing a value of selected parameter >
Each time the [SFT] key is pressed, indication in the display window alternately
→
...
changes between " 1 " and " 0 ". However the software version does not
change.
< Executing edit parameter >
After selecting " 0 " (Not executing comparison after copying) with the [SFT]
key, press the [ENT] key and Remote Keypad starts writing the parameter
value to its memory, and flashes the value in the display window. When the
writing is complete, indication of the display returns to the parameter title
(" f-02 ").
RKP002Z
Model with either an RS485 (2-wire type) connector or a common serial connector
(optional) with a baud rate of 9600, 19200 or 38400bps.
Automatic search:
Baud rate: 9600, 19200, 38400bps
Parity: even, odd, none
Communication method:
RS485 (2-wire type) or Common Serial Communication, switched by Communication
Mode Switch
Indoors, altitude 1000m or less, not exposed to direct sunlight, corrosive gas, explosive
gas, combustible gas, oil mist, dust, metal powder, etc.
20 to 93% (free from condensation and vapor)
2
5.9m/s (0.6G) or less (10 to 55Hz)
self-cooling
Key operation and description
Software version displaying
Automatic comparing function
Specifications
15
E6581277