Memory Initializing Function "Clr; Remote Keypad Parameter Editing Function - Toshiba TOSVERT VF Series Instruction Manual

4.3.5. Memory initializing function "clr"

A selected one of the memories either memory A, B, C of Remote Keypad is enable to be initialized
with this function. In addition, all memories including system memory of Remote Keypad is also
enable to be initialized.
Operating procedure
Key LED indication
→
"copy" "comp"
→ →
SFT "prot"
→
"clr"
ENT
→
"a" "b"
→ →
SFT
"sys"
→
"a" "off"
ENT
→
"off" "on"
→
"off"
SFT
→
"on" "init"
ENT
→
"clr"
- If the [ESC] key is pressed, Remote Keypad returns to previous status (except when executing).
- When the memory protection function is actuated, Remote Keypad prohibits the initialization of memory with
" prot " appearing in the display window.

4.3.6. Remote Keypad parameter editing function

This function allows the user to edit the parameters of Remote Keypad.
Remote Keypad parameter list
Title
f-01
Automatic comparing
f-02
It is recommended to set the automatic comparing function " f-02 " to "
programming errors (caused by environmental circumstances, peripheral devices, etc.) will not be automatically
detected. This could result in an accident, if the inverter is operating with the wrong parameters.
< Selecting a desired function >
Select "clr" (memory initializing function) with the [SFT] key.
"clr"
< Entering the selected function >
After selecting "clr" with the [SFT] key, press the [ENT] key and "a"
"a"
(selecting memory A) appears in the display window.
< Selecting a memory to initialize >
Each time the [SFT] key is pressed, the display changes as follow
" a"
selecting memory A
→
"c
" b"
selecting memory B
"a"
" c"
selecting memory C
"sys" selecting all memories (reprogram to default setting)
and to "a" again in this order.
< Entering the memory to initialize >
After selecting a memory for initialization (selecting memory A, by way of
example) with the [SFT] key, press the [ENT] key and "off" appears in the
display window.
< Initializing the selected memory >
Each time the [SFT] key is pressed, the display changes
"on"(to initialize selected memory)
"off" (not to initialize the selected memory).
alternately.
< Executing initialization of the selected memory >
After selecting "on" with the [SFT] key, press the [ENT] key and Remote
Keypad starts initializing the selected memory with the indication "init"
appearing in the display window. When the initialization of the selected
memory is complete, the indication in the display window returns to "clr".
Function
Software version
displaying
function
Key operation and description
Display shows the software version of Remote Keypad.
Automatic comparing function can be turned on or off.
0 : Not executing comparison after copying
1 : Executing comparison after copying (default)
Warning
14
Description
1 0
" (default). When "
E6581277
" is selected,