Alarms - Huawei UPS2000-G Series User Manual

UPS2000-G-(6 kVA-20 kVA)
User Manual
Item
Ambient humidity
Internal temp.
Runtime
Figure 4-17 Runtime screen
Table 4-13 Runtime
Item
Inv. runtime
BPS runtime

4.6.2 Alarms

On the Main Menu screen, choose Alarms and press
displayed.
Active Alarms
This screen displays the active alarm information, such as the alarm serial number,
severity, ID, and name, as shown in
Figure 4-18 Active Alarms screen
Issue 21 (2022-10-13)
NO TE
When the buzzer buzzes, hold down
release the button. After the buzzer is muted, the alarm sound cannot be restored until a
new alarm is generated.
Copyright © Huawei Technologies Co., Ltd.
Description
Humidity detected by the ambient T/H sensor
(used together with an SNMP card; if the sensor is
not connected, N/A is displayed.)
Temperature of the air near the air intake vent of
the UPS
Description
Total time during which the UPS runs in inverter
mode
Total time during which the UPS runs in bypass
mode
for 2–5 seconds. The buzzer is muted when you
Figure 4-18.
4 Control Panel
. The Alarms screen is
63