Mechanical Safety - Huawei UPS2000-G Series User Manual

UPS2000-G-(6 kVA-20 kVA)
User Manual
●
●
●

1.5 Mechanical Safety

Ensure that all necessary tools are ready and inspected by a professional
organization. Do not use tools that have signs of scratches or fail to pass the
inspection or whose inspection validity period has expired.
Before installing equipment in a cabinet, ensure that the cabinet is securely
fastened with a balanced center of gravity. Otherwise, tipping or falling cabinets
may cause bodily injury and equipment damage.
When pulling equipment out of a cabinet, be aware of unstable or heavy objects
in the cabinet to prevent injury.
Do not drill holes into the equipment. Doing so may affect the sealing
performance and electromagnetic containment of the equipment and damage
components or cables inside. Metal shavings from drilling may short-circuit boards
inside the equipment.
General Requirements
●
●
●
●
Issue 21 (2022-10-13)
Ensure that the equipment room provides good heat insulation, and that the
walls and floor are dampproof.
Install rodent guards at the door of the equipment room to prevent rodents
and insects from entering the room.
After installing the equipment, remove idle packing materials such as cartons,
foam, plastics, and cable ties from the equipment area.
WARNING
WARNING
WARNING
WARNING
Repaint any paint scratches caused during equipment transportation or
installation in a timely manner. Equipment with scratches cannot be exposed
for an extended period of time.
Do not perform operations such as arc welding and cutting on the equipment
without evaluation by the Company.
Do not install other devices on the top of the equipment without evaluation
by the Company.
When performing operations over the top of the equipment, take measures to
protect the equipment against damage.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
16