FusionModule2000 Smart Modular Data Center
Maintenance Guide
Impact on the System
The faulty button cannot be used.
Preparations
●
●
Procedure
Step 1 Remove the button.
1.
2.
3.
Figure 5-23 Removing the button
Step 2 Use the nut furnished with the new button to secure the button to the post and
connect the cable to the button.
Step 3 Verify that the button function is normal.
Step 4 Reinstall the post side panel.
----End
5.4.3.4 Replacing a Sliding Door Magnetic Lock
Issue 02 (2022-07-30)
Tool: socket wrench
Material: door open button, emergency button, or light button
Lift the side panel of the door post.
Remove the side panel of the door post outwards.
Remove the button connection cable, the nut on the button installation
position, and then the button.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Parts Replacement
79