Replacing The Strip Light Of An Atmosphere Light; Replacing An Atmosphere Light Power Supply - Huawei FusionModule2000 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide
3.
----End

5.4.21 Replacing the Strip Light of an Atmosphere Light

Impact on the System
The strip light of an atmosphere light is off during replacement.
Preparations
●
●
Procedure
Step 1 Remove the white rubber panels from the door frame.
Step 2 Remove the side covers from the posts.
Step 3 Cut off the cable tie that binds the strip light extension cable to the top of the
post.
Step 4 Pull out the strip light from the hole at the bottom of the left post.
Step 5 Disconnect the strip light terminal from the strip light extension cable of the door
post.
Step 6 Pull out the strip light from the fasteners.
Figure 5-67 Removing a strip light
Step 7 Install a new strip light.
Step 8 Install the new strip light by performing the preceding steps in reverse order.
----End

5.4.22 Replacing an Atmosphere Light Power Supply

Impact on the System
The atmosphere light is off during replacement.
Issue 02 (2022-07-30)
Replace all failed LED light tubes until all LED light tubes in the aisle work
properly.
Tool: ESD gloves
Material: atmosphere strip light
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Parts Replacement
116