FusionModule2000 Smart Modular Data Center
Maintenance Guide
Item
Availability
of the
FusionModul
e Actuator
Issue 02 (2022-07-30)
Method
1. On the
ECC800-Pro
WebUI, choose
Monitoring >
Aisle > Fusion
Module
Actuator
Group >
Fusion
Module
Actuator >
Running
Parameters,
set Lighting
Control Mode
to Manual,
and click
Submit.
2. On the
ECC800-Pro
WebUI, choose
Monitoring >
Aisle > Fusion
Module
Actuator
Group >
Fusion
Module
Actuator. On
the Running
Control page,
control the
lights.
NOTE
After checking the
FusionModule
Actuator, set
Lighting Control
Mode to the
status before the
modification in 1.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Expected Result
The FusionModule
Actuator controls
the lights in the
aisle of the smart
module.
3 Routine Maintenance
Troubleshooting
If lights cannot be
switched on or off,
check whether the AC
power cables
connected to the
lights are loose. If so,
reconnect the cables.
Otherwise, replace
the FusionModule
Actuator.
44