FusionModule2000 Smart Modular Data Center
Maintenance Guide
5.4.1.2 Replacing an ECC800-Pro PSU
Prerequisites
Do not touch the terminals in the rear of a removed PSU to avoid electric shocks.
●
●
Context
The PSU is hot-swappable.
Procedure
Step 1 Push the locking latch in the upper right corner of the PSU panel leftwards.
Step 2 Pull out the handle of the PSU to remove the PSU from the subrack.
Step 3 Gently push the reserved PSU into the subrack along guide rails, and push the
locking latch rightwards to secure the handle.
Figure 5-6 Replacing a PSU
----End
5.4.1.3 Replacing ECC800-Pro Antennas
Prerequisites
●
●
Issue 02 (2022-07-30)
D ANGER
Tool: insulation gloves
Materials: a reserved undamaged and undeformed PSU of the appropriate
model.
Tools: ESD wrist strap, ESD gloves
Materials: Spare ECC800-Pro antennas of the same model are available and
functional.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Parts Replacement
69