Advertisement
2-3-41. FRONT FRAME BLOCK
4 three tapping screws
(1.7) (CH)
3 cam tube thrust spring
2 three adjustment washers
rear (mount) side
front (lens) side
1 fixed holding (front) tube block
2-3-42. 1 GROUP BLOCK ASSY
1 three adjustment washers (for partial blur
adjustment (Tele side))
Note: Install exactly as recorded
during disassembly.
cutout
front (lens) side
rear (mount) side
center
outside
3 three tapping screws (B2 (CH))
2 Align the marking, and install
front (lens) side
rear (mount) side
2-51
SELP18110G
6 three tapping screws (B2 (CH))
5 Align the marking, and install
the front frame block.
marking
marking
the 1 group block assy.
marking
marking
Advertisement
