Advertisement
2-2-8. FZ HOLDER
2 three FZ washers
4 three small washers
rear (mount) side
front (lens) side
2-2-9. FOCUS RING (B) BLOCK ASSY
rear (mount) side
2 three bosses
1 two tapping
3 Set the flexible board off to the inside.
front (lens) side
screws (P1.4)
1 three tapping screws (B2 (CH))
3 FZ holder block
ring slider sheet (F_R)
FZ holder
ring slider sheet (F_R)
5 focus ring (B) block assy
Note: Lift the slider straight up so
that you do not damage it.
groove
focus ring (B) block assy
(from rear (mount) side)
slider
4 Rotate the focus ring (B) block assy in
the direction of the arrow and aligning
the groove with the slider.
2-8
SELP18110G
rear (mount) side
front (lens) side
slider
groove
Advertisement
