Audible Alarms; Webmin Hardware Monitoring Utilities - GE ApexPro Service Manual

Telemetry server
Hide thumbs Also See for ApexPro:
Table of Contents

Advertisement

Audible Alarms

Webmin Hardware Monitoring Utilities

Fans
5-14
Troubleshooting: Component Troubleshooting
:$51,1*
EQUPMENT FAILURE — Recurring audible alarms are a
symptom of a serious system malfunction. Do not just reset the
alarm when it occurs - also correct the problem causing the alarm.
Equipment failure could result if the problem is not resolved.
127(
Audible alarms occur together with red LED status light activation. The red
LEDs indicate which system-critical event is causing the alarm.
An audible alarm buzzer indicates critical system conditions requiring immediate
service attention.
Audible alarms are silenced by pressing the ALARM RESET button, located
behind a locking panel on right side of the ApexPro Telemetry Server front panel.
SYSTEM
SYSTEM
RESET
RESET
ALARM
ALARM
RESET
RESET
POWER
POWER
Refer to
"Service Status Indicators"
with rectifying conditions indicated by an audible alarm.
1.
Access and log into the Webmin application according to
page 2-21.
2.
Click the Diagnostics tab.
3.
Click the Hardware link.
4.
Click the Fans link.
ApexPro Telemetry Server
2001989-178
ALARM RESET button
on page 5-13 for specific information associated
"Webmin Logons"
009A
on
Revision C

Advertisement

Table of Contents
loading

Table of Contents