Checkout; General; Checkout Procedures - GE ApexPro Service Manual

Checkout

General

Checkout Procedures

Disk Check
4-16
Maintenance: Checkout
The checkout procedure process provides a method of verifying operational and
functional performance without having to disassemble the unit. Failure to attain the
prescribed results indicates a need for calibration, configuration, or repair of the
equipment.
Perform the checkout procedures upon receipt of the equipment, every year
thereafter, and each time a component is removed or replaced.
The checkout procedure process is based on the assumption that the equipment
being tested is using known, good cables. It also requires that the user be familiar
with the operation of the system. For more information concerning the operation of
these components, refer to the operator manual associated with the equipment.
Perform all of the checkout procedures included in this section to completely test the
system for proper function and operation.
Follow these instructions to completely test the system for proper function and
operation.
127(
You must close all files for this process to run. If the disk drive is currently in
use, a message asks if you want to reschedule the disk checking for the next
time you restart your system. Then, the next time you restart your system, disk
checking runs. Your disk drive will not be available to run other tasks while this
process runs.
127(
Close all files before starting the checkout procedures.
:$51,1*
LOSS OF MONITORING — This procedure will disrupt
monitoring function at the CIC Pro. Before performing this
procedure, notify the site's biomedical department so patient
communications can be established with an alternative central
station (the Bed Duplicator application can be used to temporarily
transfer beds to an alternate ApexPro tower. See
Transfer" on page 4-4). Shut down of the ApexPro Telemetry
Server causes disruption of monitoring function at the CIC Pro.
127(
This procedure requires a VNC connection. See
ApexPro Telemetry Server
2001989-178
"Temporary Bed
"VNC Logon" on page 2-20.
Revision C