Operation - Bosch BDU336Y Owner's Manual

Start-up
Connecting the charger to the mains
(2) Device socket
(3) Device connector
Note the household voltage! The voltage of the
u
power supply must correspond to the specifica-
tions given on the battery charger nameplate.
Plug the device connector (3) of the power cable into
the device socket (2) on the charger.
Connect the power cable (country-specific) to the
mains.
Use only the supplied input connection: standard AC
power cord ((3) in the diagram) when connecting to
the household electrical supply.
Bosch eBike Systems

Operation

(2)
(3)
Charging the battery when removed
(5) (6)
(5) Charging connector
(6) Socket for charging connector
(8) Operation/battery charge indicator
(9) On/off button for battery
(10) PowerTube
Switch the battery off and remove it from its holder
on the eBike. When doing so, read and observe the
operating instructions of the battery.
Ensure the battery is placed on clean surfaces
u
only. Avoid getting dirt, e.g. sand or soil, in the
charging socket and contacts in particular.
Plug the charging connector (5) of the charger into
the socket (6) on the battery.
English – 9
(10)
(8) (9)
0 275 U07 3CX | (17.03.2022)