Bosch BDU336Y Owner's Manual page 283

2. Activate <eBike Lock> by pushing the <eBike
Lock> control unit to the right.
3. If you hand over your eBike to a bicycle dealer for
maintenance, it is recommended to temporarily
deactivate <eBike Lock> to avoid a false alarm.
Software updates
Software updates must be started manually in the
eBike Flow app.
Software updates are transferred from the app to the
control unit in the background as soon as it is con-
nected to the app. During the update process, a
green flashing on the battery charge indicator (13)
shows the progress. The system is then restarted.
You can control the software updates via the eBike
Flow app.
Connecting the System Controller to the
Mini Remote
The System Controller and Mini Remote operating
units are connected via Bluetooth®.
Switch on the eBike system and do not start riding
the eBike.
If the Mini Remote operating unit has not already
been connected to the System Controller operating
unit by the bicycle dealer, proceed as follows:
1. First connect your smartphone to the System
Controller operating unit via the eBike Flow app
(see Establishing a smartphone connection).
2. In the eBike Flow app, select <Connect the Mini
Remote>.
You will be asked to switch the System Controller
and Mini Remote to pairing mode.
3. System Controller: Start the pairing process by
pressing and holding (3 s) the on/off button (12)
until the lower bar on battery charge indicator (13)
shows the pairing process by flashing blue.
4. Mini Remote: Start the pairing process by press-
ing any button until the pairing process is shown
by the LED indicator light (3) flashing blue.
5. Follow the instructions in the eBike Flow app.
Bosch eBike Systems
If pairing is successful, this is shown within 30 s on
the Mini Remote operating unit by the LED indicator
light (3) flashing green three times.
If the connection cannot be established, this is shown
by the LED indicator lamp (3) flashing red three
times. Repeat the connection process.
If you want to connect theMini Remote operating unit
to a System Controller on another eBike, the follow-
ing steps must be carried out:
1. Mini Remote: Remove the battery on the Mini Re-
mote operating unit and reinsert it.
2. Within the next 10 s, press and hold the decrease
assistance –/walk assistance (6) button for 5 s.
The pairing process is shown by the LED indicator
light (3) flashing blue for 30 s.
3. System Controller: Start the pairing process by
pressing and holding (3 s) the on/off button (12)
until the lower bar on battery charge indicator (13)
shows the pairing process by flashing blue.
If pairing is successful, this is shown within 30 s on
the Mini Remote operating unit by the LED indicator
light (3) flashing green three times.
If the connection cannot be established, this is shown
by the LED indicator lamp (3) flashing red three
times. Repeat the connection process.
Error messages
The control unit shows whether critical errors or less
critical errors occur in the eBike system.
The error messages generated by the eBike system
can be read via the eBike Flow app or by your bicycle
retailer.
Via a link in the eBike Flow app, information about
the error and support for rectifying the error can be
displayed.
Less critical errors
Less critical errors are shown by the assistance level
LED (10) flashing orange. Press the select button (5)
on the Mini Remote (1) operating unit or the mode
button (14) on the System Controller (2) operating
English – 13
0 275 U07 3RC | (29.03.2022)