Bosch BDU336Y Owner's Manual page 280

English – 10
If capacity is low, both of the lower displays change
color:
Bar
2 × orange
1 × orange
1 × red
1 × red flashing
If the eBike battery is being charged, the topmost bar
on the battery charge indicator (13) flashes.
Setting the assistance level
On the operating unit, you can set the level of assis-
tance you want the eBike drive to provide you with
while pedaling.
Mini Remote: Briefly press (< 1 s) the buttons to in-
crease assistance + (4) or decrease assistance – (6)
in order to increase or decrease the assistance level
accordingly.
System Controller: Briefly press (< 1 s) the mode
button (14) to increase assistance.
Press the mode button (14) for longer than 1 s to de-
crease the assistance.
The assistance level can be changed at any time, even
while cycling, and is displayed in color.
Level Notes
OFF Motor support is switched off. The eBike
can just be moved by pedaling, as with a
normal bicycle.
ECO Effective support with maximum effi-
ciency, for maximum range
TOUR Steady support, long range for touring
TOUR+ Dynamic support for normal riding and
biking sports
eMTB/ Optimal support whatever the terrain,
SPORT rapid acceleration when starting from a
standstill, improved dynamics and top
performance
TURBO Maximum support even at a high cadence,
for sport cycling
0 275 U07 3RC | (29.03.2022)
Capacity
30 % to 21 %
20 % to 11 %
10 % to reserve
Reserve to empty
Level Notes
AUTO The assistance is adapted dynamically to
the riding situation.
RACE Maximum support on the eMTB race
course; very direct response behavior and
maximum "Extended Boost" for the best
possible performance in competitive situ-
ations
A)
CARGO Steady, powerful support, to be able to
transport heavy weights
A) The CARGO assistance level may also have a different des-
ignation.
The designations and configuration of the assistance levels can
be preconfigured by the manufacturer and selected by the bicy-
cle retailer.
Interaction between the eBike system and
gear-shifting
The gear shifting should be used with an eBike drive
in the same way as with a normal bicycle (observe the
operating instructions of your eBike on this point).
Irrespective of the type of gear shifting, it is advisable
that you briefly reduce the pressure on the pedals
when changing gear. This will aid gear shifting and re-
duce wear on the powertrain.
By selecting the correct gear, you can increase your
speed and range while applying the same amount of
force.
Switching bicycle lights on/off (Mini
Remote only)
Before starting each journey, check that your bike
lights are working correctly.
To switch the bicycle lights on and off, press the but-
ton to increase the assistance level/bicycle lights (4)
for longer than 1 s.
Switching the push assistance on/off
The push assistance aids you when pushing your
eBike. The speed of this function depends on the se-
lected gear and can reach a maximum of 2.5 mph.
The push assistance function must only be used
u
when pushing the eBike. There is a risk of injury if
Bosch eBike Systems