PERIODIC MAINTENANCE
REPLACING THE SPROCKET
PIN
If an excessive load is applied to the driving
system, for example, when the Snowblower
is stuck in a rut, the sprocket pin will be cut
to protect the driving system.
If the sprocket pin is broken, replace it
immediately.
WARNING
Position the Snowblower on a level sur-
face.
1. Stop the engine, and remove the
engine switch key.
2. If the broken sprocket pin remains in
sprocket wheel or shaft, remove it.
1. Sprocket wheel
2. Shaft
3. Install a new sprocket pin.
1. Sprocket pin
NOTICE
Use genuine sprocket pin when replac-
ing.
– 55 –