Operation; Starting The Engine - Yamaha YS928J Owner's Manual

OPERATION

STARTING THE ENGINE

WARNING
Never operate the engine in a closed
area, otherwise it may cause uncon-
sciousness and death within a short
time. Operate the engine in a well-venti-
lated area.
1. Turn the shift lever to the "N" (Neutral)
position, and make sure that both
auger clutch lever and drive clutch lever
are releasing.
1. Shift lever
2. Auger clutch lever
3. Drive clutch lever
2. Turn the fuel cock lever from the
"STOP" position to the "RUN" position.
3
H
O
S
E
1. "RUN"
2. "STOP"
3. Fuel cock lever
3. Move the throttle lever to the "FAST
(START)
TIP
If the engine is already warmed up, it is not
necessary to move the throttle lever to the
"FAST (START)
1. Throttle lever
2. "FAST (START)
3 "SLOW
4. Start the engine by turning the engine
switch key to the "START
When the engine has started, release
this key. The key will return to the "ON
" position automatically.
– 30 –
1
RUN
CARBURETOR
" position.
" position.
2
3
1
"
"
S
T
O
P
" position.