Sony PCWA-C100 Owner's Manual page 18

Getting started
7 Click Next to install the driver.
A new window appears when the driver has been installed.
8 Click Finish.
Follow the on-screen instructions to restart the computer.
✍
Restarting the computer takes longer than booting.
To install the driver when using Windows
1 Insert the supplied CD-ROM into the CD-ROM drive.
2 Insert the Wireless LAN PC Card into the PC Card slot.
The Found New Hardware Wizard screen appears.
3 Click Next.
4 Make sure that Search for a suitable driver for my device is selected, then click Next.
5 Select Specify a location, then click Next.
6 Click Browse.
7 Select the folder containing the driver, then click Open.
❑
When installing from the provided CD-ROM in a CD-ROM drive connected to the computer:
Select the Win2k folder in the WirelessLAN folder on the CD-ROM drive.
❑
When installing after having copied the contents of the provided CD-ROM to your hard disk:
Browse to the appropriate subdirectory containing the driver. The subdirectory should be found in
the folder you copied from the CD-ROM (here assumed to be C:\Temp\WirelessLAN\Win2k).
8 Click OK to begin the search procedure.
9 Click Next to install the driver.
A new window appears when the driver has been installed.
10 Click Finish.
✍
You must log on to your system with Administrator privileges.
®
2000 Professional, proceed as follows:
n N
17