Description Of The Indicators; Inserting The Wireless Lan Pc Card - Sony PCWA-C100 Owner's Manual

Getting started

Description of the indicators

Data
Flashing (green)
Fast Flashing (green)
Off
Flashing at 10 sec intervals
Off

Inserting the Wireless LAN PC Card

If you are inserting the Wireless LAN PC Card for the first time, see Installing the driver software
for details.
This section explains how to insert and remove the Wireless LAN PC Card from your computer. You do not
need to turn off your computer when inserting the Wireless LAN PC Card.
To insert your Wireless LAN PC Card, proceed as follows:
1 Remove the PC Card slot protector from the computer. (Some computers contain the PC Card slot
protector to prevent damage to the slot while not in use.)
2 Insert the Wireless LAN PC Card into the PC Card slot.
Push the Wireless LAN PC Card into the slot until it is firmly seated. Inserting the card will extend the
eject button.
If the card does not fit easily, do not force it in. Take the card out and try reinserting it.
Link Description
Lit (green) Normal communications.
Lit (green) Peer to Peer mode.
Lit (green) The PC Card is powered, but no
communication is taking place.
The PC Card is operating, but no connection
is established.
The PC Card is powered off.
n N
13
(page 15)