Table of Contents
Advertisement
S
P
ON/ OFF
WITCHING
OWER
Press the
switch to switch the transceiver ON.
• A beep sounds and the display momentarily lights up.
• If the Transceiver Password function is programmed, "PASSWORD" appears on the
display. You must enter the password to unlock the transceiver. Refer to "Transceiver
Password", below.
Press and hold the
OFF.
T
P
RANSCEIVER
ASSWORD
To enter the password:
1 Rotate the CH control to select a digit.
2 Press the GRP
digit.
3 Repeat steps 1 and 2 to enter the entire password.
• The password can contain a maximum of 6 digits.
• Press the PF 3 key to delete an incorrectly entered character. Press and hold
the PF 3 key to delete all characters.
4 Press the PF 2
• If you enter an incorrect password, an error tone sounds and the transceiver
remains locked.
To enter the password using a DTMF keypad:
1 Press the DTMF keys corresponding to the password digits.
• The password can contain a maximum of 6 digits.
• Press the PF 3 or DTMF # key to delete an incorrectly entered character. Press
and hold the PF 3 or DTMF # key to delete all characters.
2 Press the PF 2 or DTMF
• If you enter an incorrect password, an error tone sounds and the transceiver
remains locked.
A
V
DJUSTING THE
OLUME
Rotate the VOL control clockwise to increase the volume and counterclockwise to
decrease the volume.
BASIC OPERATIONS
switch for approximately 1 second to switch the transceiver
key to accept the entered digit and move to the next
11
Advertisement
Table of Contents
