Kenwood TK-5810-K2 Instruction Manual page 38

• Scan Delete
Refer to "T
EMPORARY
• Scan Program
Refer to "S
CAN
• Scrambler/ Encryption
Refer to "SCRAMBLER (FM)/ ENCRYPTION (APCO)" on page 25.
• Scrambler/ Encryption Code
Refer to "SCRAMBLER (FM)/ ENCRYPTION (APCO)" on page 25.
• Selcall
Refer to "FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION" on
page 18.
• Selcall + Status
Refer to "FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION" on
page 18.
• Send the GPS data
Press this key when the GPS unit has been installed to send your positioning
data to the base station.
• Site Lock
Press this key to lock the current site. "SITE LOCK" appears on the display
and the transceiver cannot search for alternate sites. Press and hold the Site
Lock key for 2 seconds to unlock the transceiver to allow roaming again.
• Speaker 1 – 2 Mute
Press this key to mute the secondary speaker when using a dual-head system.
The Head 1 speaker will mute when pressing this key from the Head 2 unit,
and the Head 2 speaker will mute when pressing this key from the Head 1 unit.
• Squelch Level
Press this key to adjust the transceiver squelch level. When adjusting the
squelch level, use the the GRP
and decrease the squelch level from 0 (open) to 9 (tight). The default setting
is 5.
• Squelch Off
Press this key to turn the transceiver squelch off, to better hear weak signals
on the channel. While squelch is off, the
icon appears on the display. Press the Squelch Off key again to turn the
transceiver squelch back on.
• Squelch Off Momentary
Press and hold this key to momentarily turn the transceiver squelch off.
Releasing this key turns the transceiver squelch back on. While squelch is off,
the (KCH-14) or
better hear weak signals on the channel.
• Status
Refer to "FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION" on page
18 and "Making a Status Call" on page 23.
C L
HANNEL OCKOUT
P " on page 17.
ROGRAMMING
(KCH-15) icon appears on the display and you can
MON
" on page 15.
and keys or the CH control to increase
(KCH-14) or (KCH-15)
MON
33