Table of Contents
Advertisement
•
LCD Brightness
Press this key to change the brightness level of the LCD. Each time this key is
pressed, the brightness levels cycle as follows:
•
Low Transmit Power
When using a channel programmed with high power, press this key to change
the output power to low. Press the Low Transmit Power key again to return
to high power.
•
Monitor
Press this key to turn the transceiver signaling off, to listen to all calls that are
received on the channel. While monitor is activated, the
(KCH-15) icon appears on the display. Press the Monitor key again to
MON
turn the transceiver signaling back on.
•
Monitor Momentary
Press and hold this key to momentarily turn the transceiver signaling off.
Releasing this key turns the transceiver signaling back on. While monitor is
activated, the
and you can listen to all calls that are received on the channel.
•
None
No function has been programmed on the key.
•
Operator Selectable Tone
Refer to "Q
UIET
•
OST Down
Press this key to decrease the Operator Selectable Tone number of your
selected channel.
•
OST Up
Press this key to increase the Operator Selectable Tone number of your
selected channel.
•
Playback
Refer to "VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT" on page 37.
•
Public Address
Press this key to toggle the Public Address function ON and OFF. "PUBLIC
ADRS" appears on the display when Public Address is activated. To use the
from the external speaker.
•
Request
Press this key to send a request to the dispatcher to join the talkgroup set up
by the dispatcher. While using the dynamic group, "Dyn. Regroup" appears on
the display.
•
Scan
Refer to "SCAN" on page 15.
32
High
(KCH-14) or
T
(QT)/ D
ALK
IGITAL
Mid
Low
(KCH-15) icon appears on the display
MON
Q
T
(DQT)" on page 27 for details.
UIET
ALK
Off
(KCH-14) or
Advertisement
Table of Contents
