en
Positioning and connecting
If the hose and mains cables are not
■
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the appliance in areas
exposed to frost or outdoors.
Caution!
Water damage
The connection points for the water
supply hose and water drain hose are
under high water pressure. To prevent
leaks and water damage, you must follow
the instructions in this section.
Notes
In addition to the safety information
■
listed here, the local water and
electricity supplier may have special
requirements.
If in doubt, have the appliance
■
connected by a specialist.
Installation surface
Note:
The appliance must be stable
aligned so that it does not move around.
The installation surface must be firm
■
and level.
Soft floors/floor coverings are not
■
suitable.
Installation on a base or a
wooden joist floor
Caution!
Damage to the appliance
The appliance may "wander" and tip/
topple from the base when spinning.
The feet of the appliance must be
secured with holding brackets.
Order no. WMZ 2200, WX 975600,
CZ 110600, Z 7080X0.
14
Note:
On wooden joist floors, install the
appliance:
In a corner, if possible,
■
On a water-resistant wooden board
■
(min. 30 mm thick) which is screwed
tightly to the floor.
Installing the appliance in a
kitchenette
:
Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Do not remove the appliance covering
plate.
Notes
Recess width of 60 cm required.
■
Only install the appliance underneath
■
a continuous worktop that is securely
connected to adjacent cabinets.
Removing the transport
locks
Caution!
Damage to the appliance
The appliance is secured for
■
transportation using transport locks. If
the transport locks are not removed,
the appliance may become damaged
when it is operated.
Before using the appliance for the first
time, make sure that you completely
remove all four transport locks. Keep
the locks in a safe place.
To prevent transport damage from
■
occurring if the appliance is moved at
a later date, you must refit the
transport locks before transporting the
appliance.