Adjusting the Masimo SpO
NOTE: For SpO
modules with Masimo technology and Masimo
2
sensors.
SpO
1. Press the
key.
2
2. Select Averaging.
Adjusting the Masimo SpO
NOTE: For SpO
modules with Masimo technology and Masimo
2
sensors.
SpO
1. Press the
key.
2
2. Select Sensitivity.
•
Use the Normal sensitivity setting for normal patient
monitoring purposes.
•
Use the Maximum sensitivity setting for improved poor
perfusion performance and for faster tracking of rapid SpO
saturation changes.
averaging time
2
sensor sensitivity level
2
Stopping the SpO
1. Remove the SpO
2. Disconnect the sensor cable from the monitor.
Audio Pause
3. Select
Setting SpO
alarms
2
SpO
1. Press the
key.
2
2. Select SpO2 Alarm.
3. Select Adjust Limits to set up the limits.
4. Select SpO2 Alarm to OFF/ON the limits.
5. You can also select Alarms Setup to adjust SpO
alarms.
2
87
measurement
2
sensor from the patient.
2
key to close the 'SpO2 probe off' alarm.
or related
2