Table of Contents
Advertisement
Project Planning Manual | Rexroth IndraControl VAU01.1S
2
Important Instructions on Use
2.1
Appropriate Use
2.1.1
Introduction
2.1.2
Areas of Use and Application
2.2
Inappropriate Use
Rexroth products represent state-of-the-art developments and manufacturing.
They are tested prior to delivery to ensure operational safety and reliability.
Therefore the products may only be used for the intended purpose. If they are
not used as intended, situations causing personal injury as well as material
damage can occur.
Rexroth disclaims as manufacturer any warranty, liability or dam‐
ages occurring due to inappropriate use of the products. Further‐
more, Rexroth is not paying any compensation. The user is
responsible for any risks resulting from inappropriate use of the
products.
Before using Bosch Rexroth products, the following requirements must be met
to ensure appropriate use of the products:
●
Anyone handling one of the Rexroth products in any way has to read and
understand the respective safety-related guidelines as well as the instruc‐
tions on appropriate use.
●
Hardware products have to remain in their original state, i. e. no modifi‐
cation regarding the design is allowed. Software products must not be
decompiled and their source codes must not be modified.
●
Damaged or faulty products must not be implemented or put into opera‐
tion.
●
It must be ensured that the products are installed as specified in the doc‐
umentation.
The UPS may only be used with the accessories and add-on com‐
ponents specified in this documentation. Components that are not
mentioned explicitly must neither be mounted nor connected. The
same applies for cables and wires.
An operation may only be carried out in the component configura‐
tions and combinations specified and with the software and firm‐
ware specified in the respective functional description.
The UPS may only be operated under the assembly and installation conditions,
in the position of application and under the ambient conditions (temperature,
degree of protection, humidity, EMC, etc.) specified in this documentation.
Applications of VAU01.1S that are not within the specified areas of application
or under operating conditions deviating from the operating conditions and tech‐
nical data specified in the documentation are considered as "inappropriate".
The UPS must not be used if
Electric Drives
| Bosch Rexroth AG
and Controls
Important Instructions on Use
3/43
Advertisement
Table of Contents
