Cable Management - Huawei FusionModule500 Smart User Manual

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)
●
●
●

3.6 Cable Management

A cable tray is used inside a cabinet to route cables from the front to the rear.
Cable Tray
A cable tray is used for forward and backward cabling. It uses mounting ears to
facilitate device installation.
Figure 3-23 Cable tray
Table 3-39 Cable tray technical specifications
Dimensions (H x W x
D)
43.6 mm x 482.6 mm x
250 mm
Issue 02 (2021-06-30)
that cannot be directly connected, such as cabinets and cabinet doors. A cable
for connecting these two metal components has a minimum cross-sectional
2
area of 6 mm .
A ground bar or general ground point is provided in the cabinet for
equipment grounding. The ground bar does not need to be insulated.
A ground terminal is greater than or equal to M8 in dimensions. A yellow
ground label is attached close to the general ground terminal for
cabinets.
Connect equipotential cables to metal components without carrying currents
in the module, such as metal doors and windows. Each equipotential cable
has a minimum cross-sectional area of 6 mm
Copyright © Huawei Technologies Co., Ltd.
2
Weight
1.89 kg
3 System Architecture
.
Space Occupied
1 U
52