FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)
Figure 6-15 Removing the camera
Step 4 Install the new camera and SD card, reconnect the network cable, and secure the
camera to the base using screws.
Step 5 Commission the camera by referring to the ECC800-Pro user manual of the
appropriate version.
Step 6 Check that the camera functions properly.
----End
6.4.3.6 Replacing a VCN510
Prerequisites
●
●
●
Context
Videos cannot be recorded during the replacement of the VCN510.
Do not operate with power on. Take appropriate insulation measures.
Issue 02 (2021-06-30)
Recommended tool: Phillips screwdriver
A VCN510 needs to be replaced.
A spare VCN510 of the same model is available and functional.
NO TICE
D ANGER
Copyright © Huawei Technologies Co., Ltd.
6 O&M
191