Creating An Ecc800-Pro On The Neteco - Huawei FusionModule500 Smart User Manual

FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S)

5.3.11.1.9 Creating an ECC800-Pro on the NetEco

Prerequisites
●
●
Context
For detailed operations, see
Commissioning Guide of the corresponding version.
Procedure
1.
2.
3.
Issue 02 (2021-06-30)
You have logged in to the NetEco client by web browser.
You have created modules in Data Center Planning.
Choose System > Configuration > Data Center Planning from the main
menu. The Data Center Planning window is displayed.
Click in the upper left area of the Data Center Planning window.
Click Access switch to the Add Device window. You can add an ECC800-Pro
device to the specified modular in the Add Device window.
Figure 5-21 Adding an ECC800-Pro device to the modular
NO TE
Click OK, and you can view the task information, including Type, Device Name,
Region, Progress, Status, Start Time, End Time, and Information in the displayed
Progress window.
Copyright © Huawei Technologies Co., Ltd.
iManager NetEco 6000 Device Installation and
5 Power-On Commissioning
147