Mode Operation - Bosch AMC2 Installation Manual

16 en | Connections
3.3.2 24 V mode operation
Notice!
i
Make sure that the power supply has the correct output voltage
(24 V).
Figure 3.4: 24 V mode
Connecting the battery cables
1.
2.
3.
4.
5.
2021-03 | V06 | F.01U.330.018
G
E
1a
+ -
Set the switch of the power supply unit to 24 V.
Connect the 2-pin plug to the power supply interface
labeled BAT.
Connect 1a (red) to the positive (+) pin of the first
rechargeable battery.
Connect 1b to the negative (-) pin of the second
rechargeable battery.
With cable E (blue), connect the negative (-) pin of the first
rechargeable battery to the positive (+) pin of the second
rechargeable battery.
AMC2 enclosure with 1 DIN rail
1b
+ -
Bosch Security Systems B.V.