12 V Mode Operation - Bosch AMC2 Installation Manual

14 en | Connections
3.3.1

12 V mode operation

Notice!
i
Make sure that the power supply has the correct output voltage
(12 V).
1a
Figure 3.3: 12 V mode with one battery (left); 12 V mode with two batteries
(right)
12 V mode operation using one battery
1.
2.
3.
4.
5.
6.
2021-03 | V06 | F.01U.330.018
G
1b
+ -
Set the switch of the power supply unit to 12 V.
Connect the 2-pin plug to the power supply interface
labeled BAT.
Connect 1b (black) to the rechargeable negative (-)
terminal of the battery.
Connect 1a (red) to the rechargeable positive (+) terminal
of the battery.
Attach the bracket (C) to the back of the housing next to
the batteries.
Attach the connectors 2a and 2b to the bracket.
AMC2 enclosure with 1 DIN rail
2a
1a
2b
G
1b 2a
+ - +
Bosch Security Systems B.V.
2b
-