12
en | Connections
Figure 3.2: Connections of the LED indicator
Connecting the tamper contact (H)
1.
2.
Danger!
Risk of electric shock
Make sure that all wires have zero potential.
Connecting the main AC supply (X)
1.
2.
3.
4.
2021-03 | V06 | F.01U.330.018
AC
BAT
RTH
L N
+ -
N G
L1
Connect the loose ends of the tamper contact cable to the
two-pin screw connector (marked with T) at the top of the
AMC2.
Position the cable in the space between the housing and
the mounting rail.
Connect the ground cable to the main grounding point
(Figure 1.1, position 8).
Connect the neutral wire to terminal N (Figure 3.2).
Connect the phase wire to terminal L1 (Figure 3.2).
Shorten the external supply wires so that the ground wire
is a minimum of 20 mm longer than the live wires.
–
This will prevent the ground wire from being
accidentally disconnected.
AMC2 enclosure with 1 DIN rail
Bosch Security Systems B.V.