AMC2 enclosure with 2 DIN rails
3.3.1
12 V mode operation
Notice!
i
Make sure that the power supply has the correct output voltage
(12 V).
1a
Figure 3.3: 12 V mode with one battery (left); 12 V mode with two
batteries (right)
12 V mode operation using one battery
1.
2.
3.
4.
5.
6.
Bosch Security Systems B.V.
G
1b
+
-
Set the switch of the power supply unit to 12 V.
Connect the 2-pin plug to the power supply interface
labeled BAT.
Connect 1b (black) to the rechargeable negative (-)
terminal of the battery.
Connect 1a (red) to the rechargeable positive (+) terminal
of the battery.
Attach the bracket (C) to the back of the housing next to
the batteries.
Attach the connectors 2a and 2b to the bracket.
2a
1a
2b
2022-02 | V06 | F.01U.330.017
Connections | en
G
1b
2a
+
-
+
15
2b
-