Firmware Xx.62, 37.72 - Bosch ADS-AMC2-4R4CF Installation Manual

Access Modular Controller 2
2
3
4
5
5a
5b
5c
6
7
8
9
10
11
12
13
14
15
11.2.4

Firmware xx.62, 37.72

This firmware supports DTLS. For details on how to set the required device communication
password, refer to the configuration manual of the host system.
–
Bosch Security Systems B.V.
S/N1: 0910024419
S/N2: 22850034
11.18 12:24:18 S
Dig. IO: ::::::::::::::::
(only available with
Dig. I1: ::::::::::::::::
Dig. I2: ::::::::::::::::
Dig. I3: ::::::::::::::::
MAC 001B860012AB
N AMC-1234-5678
I 192.168.10.18
G 192.168.10.255
M 255.255.255.0
H 192.168.10.10
DHCP 1
D 192.168.10.1
Host: + "C"
HSC state: x
If a brand-new AMC is connected to a host system supporting DTLS, the AMC will be
configured with DHCP active and its IP address will be set to a device-specific link-local IP
address in the range 169.254.0.0/16.
Serial number 18 digits - Part1 10 digits
Part 2 - 8 digits
Current date and time (MM.DD hh:mm:ss)
(S) = daylight saving
Display of the digital contacts: the input signals
set will be shown with an extension above - output
signals with an extension below. The first eight
digits display the controller's signals. The second
eight digits display the extension board's signals
(Not available for Bootloader FW)
If there are I/O-Boards connected the signals will
be shown on separate pages. (Not available for
Bootloader FW)
Network device address (MAC)
Network name of the controller (max. 14 char.)
See Configuring Ethernet interface, page 34 .
IP-address of the controller
IP-address of the gateway
Subnetmask
IP-address of the host computer
DHCP-status:
1 = on
0 = off
IP-address of the DNS server
Host activity:
+ = online
- = offline
"C" = Counter (0 to 9) of the received data
packages from the host interface.
RS 485 Bus connection:
A = Address 1 ... H = Address 8
Host secure status:
1 = enable
2 = disable
(Not available for Bootloader FW)
Installation manual
Appendices | en 51
2022-03 | V03 |