Start Sequence Of The Drive - ABB ACS5000 User Manual

ABB
Tripped
8.5.2

Start sequence of the drive

5k A UM
The status message indicates that a fault condition has occurred that
requires a shutdown of the drive. The status message always alternates
with the specific fault message. The type of shutdown depends on the fault
class the fault condition is assigned to in the drive software.
Not ready on
&
Ready on
Charging
DC link charges
Fan switches on
MCB closes
Ready run
INU starts to modulate
Ready ref
Operation
3BHS221906 ZAB E01 Rev. D
Ready-on conditions:
Auxiliary power supply is on
Door with electro-mechanical lock is
locked
Drive not grounded
No emergency off present
No fault present
On command
Start command
Chapter 8 - Operation
8-5 (14)