Chapter 8 - Operation
8.2
Safety
8.3
Overview
8.4
Overview of local operator panel
8-2 (14)
For the maximum ambient temperature, see the
The drive must only be operated by qualified and authorized personnel, ie,
personnel who are familiar with the operation of the drive and the hazards
involved.
The chapter outlines the local operation of the drive.
Control of the drive via a PLC or a higher-level control system is not
described in this chapter. If the drive is controlled from remote, see the
appropriate manuals for information.
The panel messages and parameter settings used in this chapter are
typical examples to illustrate the related instructions and display functions
and may therefore differ from the actual messages and parameter settings
in the drive.
The operator panel on the control compartment door enables the operator
to control the drive without restrictions if all requirements for normal
operation are met.
The functions of the operator panel include:
■
Connecting / disconnecting the main power supply
■
Setting the reference value
■
Starting, stopping the drive system
■
Displaying:
■
Actual values
■
Status messages
■
Alarm and fault messages
■
Viewing, setting parameters
■
Resetting alarm and fault messages
■
Activating the emergency-off circuit
■
Testing the bulbs of lamps and illuminated pushbuttons
3BHS221906 ZAB E01 Rev. D
ABB
Rating plate
of the drive.
5k A UM