Additional Information - Recording A Tele-File Mark (Ok/Ng/Kp) Onto The Memory Label - Sony HKDW-704 Operation Manual

Gps unit
Hide thumbs Also See for HKDW-704:
Table of Contents

Advertisement

Additional Information -
Recording a Tele-File Mark
(OK/NG/KP) onto the Memory
Label
The Tele-File mark, that is a rating of the images recorded just before
they are recorded, can be recorded onto the memory label with the
recording start time code, every time the unit enter the rec pause mode.
The following three kinds of Tele-File marks are available:
• OK: Place this mark when you decide the recorded images are good.
• NG: Place this mark when you decide the recorded images are not
good.
• KP: Place this mark when it is hard to decide whether or not the
recorded images are good just after recording, or when you want to
insert a mark between multiple shots.
Recorded Tele-File marks are read by studio-use devices, logging
software, and so on, which support the Tele-File function. These marks
are very helpful for improving the efficiency of tape editing.
Note
To use this function, the TELEFILE MARK function should be assigned
to the ASSIGN 1 switch.
Assigning the TELEFILE MARK function to the
ASSIGN 1 switch
Follow the procedure below to assign the TELEFILE MARK function to
the ASSIGN 1 switch.
1
Set the MENU ON/OFF switch to ON.
A-9
Appendix
A

Advertisement

Table of Contents
loading

Table of Contents