Sony HKDW-704 Operation Manual page 107

Note
When you change the output format, turn the power of the camcorder off
after completing the settings once, and then turn the power on again.
Otherwise, this change does not take effect.
Data to be output depends on the operation mode of the camcorder.
Operation mode
REC/EE
PB mode
Note
In PB mode, information on satellites, that is the locations of GPS
satellites, is not included.
OUTPUT FORMAT
SONY
NMEA
SONY
NMEA
Output data
All items of GPS data are
converted into the Sony
standard serial format. (for
Navin' You)
GPS data is converted to
the NMEA-0183 format. (for
ordinary maps)
GPS data recorded on a
tape is converted to the
Sony standard serial mode.
for Navin' You)
GPS data recorded on a
tape is converted to NMEA-
0183 format. (for ordinary
maps)
Chapter 1 Using GPS Data
1
1-27