Sony HKDW-704 Operation Manual page 105

b) When you select this item, the TIME ZONE setting window appears. This
setting window allows you to set the time difference.
For details, see "1-7-2 Setting the Time Zone" on page 1-28.
c) Select the proper value, referring to the "Geodetic System and Areas (for
Navin'You)" on page A-6.
Note
The geodetic system used in each country may change. Check the map
software to be used to select the proper value. For information about the
geodetic system, see "Geodetic system" on page 1-26.
In Japan, the geodetic system was changed from Tokyo datum to Wgs84 on
April 1, 2002. Which system is used depends on the map makers. Select
one according to a map to be used.
d) Select the format according to map software to be used.
For detailed information on the output format, see "Output from the
REMOTE connector" on page 1-26.
4
Turn the MENU knob to move the t mark to the item you want to
set, and then push the MENU knob.
The t mark to the left of the selected item changes to a z mark
and the z mark to the left of the setting changes to a ? mark.
5
Turn the MENU knob to change the setting of the selected item or to
display the desired value, and then push the MENU knob.
The z mark to the left of the selected item changes to a t mark
and the ? mark to the left of the setting changes to a z mark.
6
To continue with the remaining settings, repeat steps 4 and 5.
Chapter 1 Using GPS Data
1
(Continued)
1-25