Table of Contents
Advertisement
7
1
To turn the menu operation off, set the MENU ON/OFF switch to
OFF.
The menu disappears from the viewfinder screen and the display
indicating the current status of the camcorder appears along the top
and bottom of the viewfinder.
Geodetic system
To calculate the location precisely, you should select the number of the
geodetic system which is used for map making in each country on the
GPS DATUM item on the GPS SETUP page. Data calculated for a
different geodetic system will not be correctly displayed on the map.
Refer to "Geodetic system and Areas (for Navin'You)" on page A-6.
Note
The geodetic system which is used in each country may be changed.
Confirm the geodetic system using your map software.
Output from the REMOTE connector
The output format of data from the REMOTE connector depends on the
setting of the OUTPUT FORMAT item on the GPS SETUP page. This
setting does not affect the recording format. Set the output format
according to the map to be used for playback.
Setting
SONY
NMEA
a) For the output format, see "1-8-3 GPS Output Format of the REMOTE
Connector (8-pin)" on page 1-34.
1-26
Chapter 1 Using GPS Data
Output
Outputs data for Navin'You.
Outputs GPGGA, GPVTG, and GPRMC in the NMEA-
0183 format.
Advertisement
Chapters
Table of Contents
